Controlling Algae in Nurseries: The Green Monster

Hannah Rouillard, Content Manager for BioSafe Systems, LLC

Algae growth has similar requirements as cultivated crops for development: light, water, and nutrients, which means the frequent irrigation, nutrient runoff, and increased temperatures during the late spring and summer months create an environment primed for algae growth. Greenhouses, nurseries, and landscapes can all be vulnerable to algae when the right factors combine; acting preventatively is key for effective management. Algae spores spread via water, people, and equipment with exponential growth aft er germination. Therefore, controlling indoor growing conditions to reduce spore transmission is the first line of defense. Cleaning and sanitation protocols are vital for algae remediation, as is source water treatment. Implementing efficient nutrient programs, reducing runoff, and improving drainage and airflow mitigates these conditions too.

In aquatic systems like lakes and ponds, some levels of algae help support a healthy ecosystem by oxygenating the water, however large algae blooms in source water during the summer months can be problematic. Unfortunately, blue-green algae and 

cyanobacteria blooms are common and are knecome a vector for insect pests and pathogens and can build up in irrigation lines and emown to produce dangerous toxins that harm people, animals, and the environment. Algae also bitters; it can clog filters and intake valves, requiring constant maintenance and labor.

If algae show up inside a facility it can create worker safety hazards and becomes a vector for insect pests and pathogens on equipment and soil surfaces. Algae on hard surfaces cause a range of issues when it covers equipment like irrigation tanks, emitters, walkways, and weed mats. When algae are left unchecked on hard surfaces, the slimy surface creates dangerous slip-and-fall hazards around the workplace. Aside from workplace risks to personnel, algae infestations on the soil surface absorb vital nutrients meant for the plant and irritated hydrophobic soil conditions further complicate the delivery of these vital inputs. Lastly, insects like fungus gnats and shore flies make algae their habitat and food source, then reproduce; and populations can get out of hand. Implementing an algae management program can reduce these pest populations without the need for pesticide applications.

Greenhouses, nurseries, and landscapes, along with aquatic systems like lakes and ponds, can all be vulnerable to algae growth. Above are images of examples of algae growth in different settings and environments.

From the outside, managing algae infestations is vital to the success of your operation and the best place to start is with water. Prevent nutrient overload in source water by testing runoff for residual chemistry found in common fertilizers and adding beneficial bacteria to break down organic buildup. Sometimes physically removing large algal blooms from the surface with a rake, skimming it off the surface top, or applying a water-safe oxidizer to break up the blooms helps too. Injecting sustainable sanitizers into the lines can break down biofilm housing bacteria and prevent the transmission of pests and pathogens through the system into your facility.

Once inside, consistent line cleaning during production and between crops is important to maintain cleanliness after source water quality has been addressed. Inside a facility, identify your critical control points using foot pads at every entryway to cut down on cross-contamination. It is recommended not to use a power washer when cleaning algae off surfaces. While the water pressure is effective at moving the algae out of corners and off mats and tables, it doesn’t kill the algae and often releases pathogens and spores lingering in the slime into the air to circulate. The bottom line is; when you encounter the green monster in your operation, treat it first with a cleaner that will get it off equipment, tools, and surfaces, then always follow up with a sanitizer to oxidize the algae on contact, immediately. 

LNLA Quarterly Newsletter – Volume 83 page 35

Asset 1
About BioSafe Systems

BioSafe Systems, LLC is a company leading innovations since 1998 for environmentally sustainable practices and products that protect crops, water, and people. Our success hinges on a commitment to customer service, quality research, regulatory compliance, and the willingness to adapt. BioSafe Systems is a family-owned and operated company certified by NQA to ISO 9001:2015, 14001:2015, and 45001:2018, and our products are manufactured proudly in the United States. > More about BioSafe Systems

Getting the Job Done Since '98

Enter to win a Milwaukee® 5-Tool Combo Kit, $600 Value!

Tool kit

M18 18V Lithium-Ion Cordless Combo Kit (5-Tool) with 2-Batteries, Charger, and Tool Bag

The Tool Combo Kit includes an M18 Compact 1/2 in. Drill Driver, M18 1/4 in. Hex Impact Driver, M18 6-1/2 in. Circular Saw, M18 Random Orbit Sander, M18 LED Work Light, M18 REDLITHIUM XC 3.0 Ah Battery, M18 REDLITHIUM Compact Battery, M18/M12 Multi-Voltage Charger and contractor bag.

Terms: One entry per person. Continental US only. One winner will receive the Milwaukee 5-Tool Combo Kit. June 30, 2023, is the last day of entry. Winner will be contacted Wednesday, July 5, 2023.