OxiDate 5.0 is uniquely positioned to strengthen foliar spray programs and in-season agricultural soil applications. Its formula utilizes BioSafe Systems’ proprietary peroxyacetic acid (PAA) chemistry to eradicate plant pathogens on contact with no harmful residues and no known resistance.
BioSafe Systems announces that the California Department of Pesticide Regulation (DPR) accepted an OxiDate 5.0 label amendment. DPR removed the toxic to bees statement from the Environmental Hazards section and added new crops, pests, and use directions. The EPA removed the toxic to bees statement from the federal label in March 2022.
Removal of the toxic to bees statement allows growers and PCAs to manage disease resistance, environmental risk, and meet customer sustainability requirements.
Only compatible when using a rate of 2 oz/10 gals of Actiguard 50WG and OxiDate 5.0 at 1:200.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Needs to be sprayed within 4 hours.
Bacillus spp. in soil applications is not tank-mix compatible; however, an application of OxiDate 5.0 can be applied to the soil prior to the applications of Bacillus-based products. Contact Contact your BioSafe Systems technical representative for further instructions.
Foliar applications of Bacillus spp. products are compatible, when the mode of action (MOA) is primarily by metabolites triggering ISR/SAR and other antimicrobial properties. When the (MOA) is dependent on spore colonization on leaf surface, mixture is not compatible.
“Multiple Bacillus spp. based products are commercially available, as a result the varying primary MOAs and their compatibilities with OxiDate 5.0 have not all been verified. Contact your BioSafe Systems technical representative for further instructions.”
Only compatible at 1:200 with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
Wait 48-72 hours after copper application before applying OxiDate 5.0
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
Only compatible with Cueva rates 2 gals/30 gals and 2 gals/100 gals with OxiDate 5.0 at 1:256 and 1:500.
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
Wait 48-72 hours after copper application before applying OxiDate 5.0
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
Only compatible with Magna-Bon CS 2005 at 32 fl. oz/100 gals when combined with OxiDate 5.0 at 1:400-1:100.
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
Only compatible with NORDOX 75 WG rate of 1-2 lbs/100 GPA when combined with OxiDate 5.0 at 1:200.
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
Need to spray solution within 4-6 hours.
Only compatible at 1:200 with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible at 1:200 with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Needs to be sprayed within 1 hours.
Only compatible at 1:200 with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible at 1:200 with OxiDate 5.0.
Only compatible at 1:200 with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Not all sea kelp products are formulated the same and must be jar tested prior to tank-mixing with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Needs to be sprayed within 4 hours.
Need to spray solution within 4-6 hours.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible at 1:200 with OxiDate 5.0.
Contact your BioSafe Systems technical representative for further instructions.
Contact your BioSafe Systems technical representative for further instructions.
Need to spray solution within 4-6 hours.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible with Metalosate Manganese at 32 fl. oz/100 gals when combined with OxiDate 5.0 at 1:256.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible at 1:200 with OxiDate 5.0.
Needs to be sprayed within 4 hours.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible at 1:200 with OxiDate 5.0.
Combination of OxiDate 5.0 and these materials must be used within 1-3 hours of mixing.
Only compatible with NUTRI-LEAF 20-20-20 at 5-10 lbs/100 gallons with OxiDate 5.0 at 1:100.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible at 1:200 with OxiDate 5.0.
Use the lowest rate of the surfactant with OxiDate 5.0 at 1:200 (0.5% v/v).
Only compatible at 1 lb/100 gals when combined with OxiDate 5.0 at 1:100 to 1:256. Agitate continously and spray within 4-6 hours.
Only compatible at 1:200 with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible with ACE 29 at 8 qt/100 gallons with OxiDate 5.0 at 1:200. Use within 1 hour of mixing.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible with M-Pede at 2% when combined with OxiDate 5.0 at 1:100 and 1:200. M-Pede spray solution requires a minimum 8.0 pH; apply within one hour of mixing.
Only compatible at 1:200 with OxiDate 5.0.
Only compatible at 0.91 lbs/100 gallons with OxiDate 5.0 at 1:100.
Only compatible at 1:200 with OxiDate 5.0.
Not compatible due to a high pH.
Contact your BioSafe Systems technical representative for further instructions.
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
Only compatible with Sulfur at 5 lbs/100 gal when combined with OxiDate 5.0 at 1:256.
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
Apply OxiDate 5.0 before or 72 hours after dusting sulfur application.
Plant Sensitivity: not all plants and their varieties have been tested for phytotoxicity; therefore, a small site application should be made on the crop to be treated to ensure that a phytotoxic response will not occur when tank mixing with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Other thyme oil products have not been evaluted.
Only compatible at 1:200 with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Only compatible at 1:200 with OxiDate 5.0.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Contact your BioSafe Systems technical representative for further instructions.
OxiDate 5.0 has been shown to be tank-mix compatible with many fertility products; however, not all materials and their varying formulations have been tested. It is highly recommended that you contact your local BioSafe Systems technical representative for further guidance on specific tank mixes with these materials.
Terms: One entry per person. Continental US only. One winner will receive the Milwaukee 5-Tool Combo Kit. June 30, 2023, is the last day of entry. Winner will be contacted Wednesday, July 5, 2023.